01 Flat groove plane class

Construction process: the construction of the flat groove plane is generally parallel or slightly lower than the decorative surface, the grid bar generally adopts black lacquer tracing process, the effect of imitation stone is general, but the construction process is simple, suitable for large-area construction and high-rise buildings.

Construction process: clean the base layer - batch scraping mortar - sanding, dripping - dividing, bullet line - segmented depiction tracing paint - pasting masking paper tape - brush tracing paint fixing tape - batch coating composite primer - spraying colorful paint topcoat - sanding, repairing - brushing cover topcoat - tearing masking paper, repairing tracing paint - completion.

There is also a simple construction method for flat groove planes, that is, after pasting with special tape, the color of the tape is used to leave the tape on the finished surface to form a compartment effect.

02 groove plane class

Construction process: The groove plane is divided into grooved strips, and the overall finish is flat. The depth of the groove is generally 2mm, the width is generally 8mm (specific by the design), the main appearance highlight and other construction differences are the use of sealant in the groove, the groove of the glue forms a semi-arc shape, the imitation stone feeling is particularly strong, waterproof and crack resistance is superior.

Construction process: clean the base layer - compartment, elastic line, adhesive tape - fixed tape, corner protection - batch scraping mortar - sanding, water - tearing tape - batch coating composite primer - spraying colorful paint topcoat - sanding corners, deburring - spraying mask topcoat - pasting masking paper, gluing - tearing masking paper - completion.

03 Convex groove plane class

Construction process: the grid is convex on the decorative surface or slightly higher than the decorative surface, the grid bar generally adopts thick black lacquer tracing process, the construction effect is more special at close range, the construction process is simple, suitable for large-area construction of high-rise, not suitable for exquisite imitation stone effect.

Construction process: clean the base layer - batch scraping mortar - sanding, drenching - batch coating composite primer - spraying colorful paint topcoat - sanding, repairing - spraying cover coat - compartmental, bullet line - pasting masking paper, batch vinyl - tearing masking paper - completion.

04 Flat groove rough surface

Construction process: The construction process of flat sand rough surface class is a construction method of adding flat spray molding paint or batch sand on the flat groove plan, and the finish is thickened by sandblasting or batch sand, so that the compartment groove is concave, and the construction process is simple, which is a special effect construction method.

Construction process: cleaning the base layer - batch scraping mortar - dividing, bullet line - segmented delineation line paint - adhesive tape - brush tracing paint - spraying or batch coating composite primer modeling - spraying colorful paint topcoat - spraying cover coat - tearing tape, repairing - completion.

05 Small concave and convex class

Construction process: is based on the flat sand wool class, the surface spray molding coating or batch sand to the roller coating construction method, so that the finish thickens so that the compartment groove is concave, the sand rolling effect is stronger than the flat sand blasting and batch sand texture effect, can produce 100% rough stone fire surface effect.

Construction process: cleaning the base layer - batch scraping mortar - compartmentalization, bullet line - segmented delineation line paint - adhesive tape - brush tracing paint - rolling molding paint or sand - rolling anti-alkali primer - roller coating medium coating - spraying colorful paint topcoat - spraying cover topcoat - tearing tape, repairing - completion.

06 Large concave and convex surface class

Construction process: is based on the flat sand rough surface, the flat spray molding paint or batch sand to spray large point modeling paint or real stone paint construction method, through spraying large point modeling paint to produce a strong three-dimensional sense, with rough imitation stone effect, spray large point modeling paint texture effect is stronger, imitation stone lychee surface effect is more perfect.

Construction process: clean the base layer - batch scraping mortar - dividing, bullet line - segmented delineation line paint - paste double tear layer tape - spray large dot modeling paint or sand - tear the first layer of tape - brush tracing paint - roll anti-alkali primer - roll coating medium coating - spray colorful paint topcoat - spray cover coat - tear tape second layer, repair - completion.

There is also a construction method of concave and convex rough surface, rolling tracing paint on the mortar layer, then pasting a double tear layer of tape, and then applying a composite primer, tearing off the first layer of the tape, then spraying a colorful paint topcoat, tearing off the second layer of the tape, and finally rolling the cover coat, the finished product.